Ghost Immobiliser Installer
Ghost immobilisers are an affordable and effective method to stop car theft. It generates a unique pin code by utilizing inputs from the steering wheel, dashboard and indicators lights.
To install the Ghost immobiliser, you'll need a basic set of hand tools, a multimeter insulation tape and cable ties. It's recommended to consult a user manual to get specific instructions suited to the model of your immobiliser.
Cost
The Autowatch ghost immobiliser is an innovative device that protects your vehicle from key cloning and hacking. It analyzes the inputs from your car's buttons and generates a unique code required to turn on your vehicle. It is extremely difficult to steal because it doesn't emit radio waves. It is an effective deterrent to theft, especially in high-risk zones. It also helps prevent your car from being stolen while in the garage for repairs, since it cannot start without the correct PIN code.
In contrast to other immobilisers, the ghost immobiliser does not require batteries or power cables. It is directly connected to the CAN data network and can be easily transferred from one vehicle to another. This makes it a great option for owners of luxurious and high-performance vehicles.
Installing an Ghost immobiliser is simple and quick and can be completed in just a few hours by TASSA registered, DBS security checked technicians. Before you begin the installation process, it's important to locate a source of constant power (12V) and an electrical grounding location on the vehicle's chassis. Use a wiring diagram to locate the wires, and double-check for accuracy. Mark the wires using tape or labels to keep track of them.
After you've installed the system, it's time to test it for issues or problems. It's recommended to consult an expert if you run into any problems during the testing phase. When you're confident that the immobiliser is working as it should you will be able to have peace of mind from knowing that your car is safe from thieves.
If you live in a region that has a high level of risk, it's an excellent idea to invest in an immobiliser. It will make your vehicle more secure and could lower your insurance costs. It can also help you sleep better at night. The cost of installing the immobiliser is a minimal price in comparison to the peace of mind it provides.
Installation time
The Ghost immobiliser offers a simple, cost-effective solution to protect your vehicle from theft. It generates a unique PIN using inputs from the buttons on the dashboard, steering wheel and door panels. This makes it almost impossible for thieves to gain access to your vehicle. You can also change the code at any time to block mechanics or previous drivers from using the same code. The Keylab is also compatible with trackers in case your vehicle is stolen, you'll be able to quickly locate it and recover it.
Use basic hand tools and the user manual when installing the Ghost immobiliser. The manual gives specific guidelines tailored to your particular vehicle model and contains important safety tips. In addition, you should always disconnect the battery prior to beginning the installation process to prevent accidental airbag deployment or short circuits to the electrical system. It is also recommended to use heat shrink tubing and insulation tape to shield connections from the effects of moisture and other environmental elements.
Once you have disconnected your battery, you can start the installation by identifying the CAN L and CAN H wires on the wiring diagram of your vehicle. It is crucial to correctly identify these wires as they are vital for ensuring that the immobiliser functions properly. You can do this with a multimeter, and checking the continuity of the wires in order to ensure they are connected properly. It is also recommended to mark the location of the CAN H and L wires with labels or tape so that you can remember the exact location of them during the installation process.
Next, you will need to connect the CAN H and CAN L wires to a source of power that is constant (12V) and provides an earth connection. You should also use a fuse tap to ensure that the connections are protected against power surges. Once you have found an appropriate power source, you can connect the immobiliser to it.
You can test the system after you have finished installing it. If the system is working correctly, the engine will not start unless you enter your pin code or use your phone to authorize it. This makes it almost impossible for thieves steal your vehicle and can be combined with a Thatcham approved alarm or tracker.
Security
Ghost immobilisers prevent thefts of vehicles by connecting to the CAN network of a vehicle and require a pin code that is not intrusive before the engine is able to start. They also prevent signal boosting, device spoofing, and other techniques employed by thieves to steal vehicles. They work with a variety of vehicles. They can also be concealed which makes them difficult to detect. They can be turned on in a service mode, which lets you give your vehicle for maintenance without having to remove the device.
A professional installation is essential for ghost immobilisers as incorrect installation can make the device useless. Untrained installers could connect the wires incorrectly, or place the device in an area where it is visible to thieves. This could cause your system to malfunction, and even harm your vehicle. Additionally, a poor installation can void warranties on both the device and your car.
The installation process for ghost immobilisers is difficult that requires patience and precise work. Installers must mark and identify the CAN H wires and double-check for accuracy. The installer should find a power source that delivers constant 12V and then test the wires to ensure proper connection.
In the event of an accident, the immobiliser will shut off the ignition of the vehicle, and display a warning message on the dashboard. It will also send a notification to the owner via the CAN H or CAN L wire, letting them know that their vehicle has been involved in an accident. The device can even be activated remotely if a driver is injured.
A Ghost immobiliser is an excellent option for cars that are luxurious, as it does not interfere with the car's appearance or performance. It's a good choice for drivers who want to protect their investment and avoid costly repairs. It can also help reduce insurance costs since insurance companies often offer discounts to those who use the device. Additionally, the device can be used in conjunction with the GPS tracker to aid police locate and recover stolen vehicles.
Warranty
Ghost immobilisers are the most effective solution to increase the security of your vehicle. These revolutionary devices are discreetly embedded into the wiring system of your vehicle and are almost unnoticeable. They can also be arm and disarmed via an app on your smartphone, giving you peace of mind when you leave your vehicle without a guard. Ghost Immobilisers can save you money on your insurance premiums.
Ghost immobilisers prevent your vehicle being taken away by blocking signals that your key fob sends to the engine control unit. This prevents cloning and hacking of the engine, making it more difficult for thieves to get access to your vehicle. The device can also signal a warning or shut down the car's engine if it detects any tampering.
The primary concern for car owners is whether the installation of a Ghost Immobiliser could impact their warranty. This issue is complex and depends on a number of variables. The quality of the installation is vital and so is the quality of the equipment employed. Professional installers will make sure that the device is properly connected to your vehicle's wiring to limit the risk of interference. They will also make sure that the device doesn't affect the appearance of your vehicle or functions.
Another important consideration is the type of vehicle you own. Different manufacturers have different policies on modifications. Warranty offered by dealers may be more lenient compared to aftermarket warranties. To understand the ways in which Ghost Immobilisers could affect your coverage, read the terms of your vehicle's original manufacturer's warranty.
Before starting the installation process, it is recommended to disconnect the battery in order to avoid short circuits and airbag deployment. Once you've done that, you need to identify the CAN H and CAN L wires. These are the wires which provide power to the immobiliser. It is important to mark these wires using either a tape or marker so that you are able to identify them in the future. It is also recommended that you test these wires with a multimeter in order to determine their electrical quality.